How to Access BIOS in Windows 10: Step-by-Step Guide

Hello there, Windows 10 users! Have you ever encountered a problem with your computer and the only way to solve it is by accessing the BIOS settings? Don’t worry, we’ve got you covered! In this article, we will guide you on how to go to BIOS in Windows 10.

Step-by-Step Guide on How to Go to BIOS in Windows 10

Step 1: Restart your computer

The first step in accessing the BIOS settings is to restart your computer. Hold the Shift key while clicking on “Restart” from the Start Menu.

Step 2: Choose Advanced Startup Options

Upon restarting, a blue page with advanced options will appear. Click on “Troubleshoot” > “Advanced Options” > “UEFI Firmware Settings.”

Step 3: Enter the BIOS password (if any)

If you have set a password for the BIOS, you will need to enter it at this point. If not, skip to step four.

Step 4: Enter the BIOS settings

After entering the password (if applicable), you will enter the BIOS settings.

Step 5: Use your computer’s manual

If you’re unsure about the changes you want to make in the BIOS settings, it’s always best to consult your computer’s manual for guidance.

Step 6: Note your current settings

Before making any changes, it’s important to note down your current settings. This will help you revert back in case anything goes wrong.

Step 7: Make the necessary changes

Once you’re ready, make the necessary changes to your computer’s BIOS settings.

Step 8: Save and Exit

After making the changes, save and exit the BIOS settings.

Step 9: Reboot your computer

Reboot your computer to apply the changes.

Step 10: Check for any issues

After rebooting, check for any issues that may have arisen from the changes you made.

Step 11: Revert back if necessary

If there are any issues, revert back to your previous settings.

Step 12: Seek professional help

If you’re still having issues, it’s best to seek professional help.

Other Helpful Information About BIOS Settings

BIOS stands for Basic Input/Output System. It is a firmware interface used to initialize and test hardware components installed in a computer system. BIOS is responsible for loading and booting the operating system on a computer.

It is important to be cautious when making changes in the BIOS settings. Any incorrect setting may cause your computer to malfunction or even cause permanent damage to your hardware. Always consult your computer manual and seek professional help if necessary.

Tips and Tricks

1. Avoid overclocking

Overclocking refers to the process of increasing a computer’s clock rate to improve performance. However, this may cause your computer to overheat and ultimately damage your hardware.

2. Keep your BIOS up-to-date

BIOS updates are released to fix bugs and improve compatibility. It’s important to keep your BIOS up-to-date to avoid any potential issues.

3. Check for virus/malware

Viruses and malware can cause damage to your BIOS and other hardware components. Always run regular checks to ensure your computer is free from virus/malware.

4. Backup your settings

It’s important to backup your BIOS settings before making any changes. This will help you avoid any potential issues and make it easier to revert back to your previous settings if necessary.

5. Research before making changes

Before making any changes to your BIOS settings, research and ensure that you fully understand the change you’re about to make. This will help avoid any potential issues.

6. Always restore default settings

If you’re not sure about any changes made in the BIOS settings, always restore the default settings.

7. Use caution when disabling features

Disabling certain features in the BIOS settings may cause issues with your computer’s functionality. Always check the computer manual and research before disabling any features.

8. Keep your computer cool

An overheated computer may cause damage to your hardware. Ensure your computer is placed in a well-ventilated area and use cooling systems if necessary.

9. Consult professional help

If you’re unsure about any changes in the BIOS settings, always seek professional help.

10. Be careful with BIOS manufacturer software

BIOS manufacturer software may offer additional functionality to your computer, but always use caution and ensure the software is from a trusted source. In conclusion, accessing the BIOS settings in Windows 10 requires a few simple steps and a lot of caution. Always make sure to consult your computer manual and seek professional help if necessary. Use the tips and tricks provided in this article to optimize your computer’s performance while avoiding any potential issues.

Advantages and Disadvantages: How to Go to BIOS in Windows 10


1. Allows access to important system settings: By entering BIOS, you can access important system settings and configurations that cannot be accessed through the Windows interface.

2. Provides a way to troubleshoot issues: If your computer is experiencing issues such as booting problems, hardware failure, or overheating, accessing BIOS can help you diagnose and solve these issues.

3. Enables you to customize system preferences: BIOS provides a way to customize your computer’s hardware and software settings to your liking. This includes settings related to energy management, boot options, and more.

4. Can enhance system performance: By modifying certain BIOS settings, you can enhance the performance of your computer, such as by overclocking the CPU or changing the RAM timings.

5. Compatible with any Windows system: Accessing BIOS in Windows 10 can be done on any computer that runs on Windows, regardless of the brand or model.


1. Can be risky: Accessing and modifying BIOS settings can be risky if you don’t know what you’re doing. Unintentionally changing important settings can cause serious harm to your system.

2. Not user-friendly: BIOS is not designed with the average user in mind and can be confusing and intimidating to navigate.

3. Specific keystrokes required: The keystrokes needed to access BIOS can vary depending on the computer hardware and firmware, making it difficult to remember and access when needed.

4. Limited use: Accessing BIOS is usually only necessary for specific tasks and is not something most users need to do regularly.

5. Time-consuming: The process of accessing and navigating through BIOS can be time-consuming, especially if you’re unfamiliar with the layout and settings.


1. What is BIOS?

BIOS stands for Basic Input/Output System. It is a firmware that initializes and tests hardware components during the boot process.

2. Why would I want to access the BIOS?

You may need to access the BIOS to change hardware settings, configure boot devices, or troubleshoot boot problems.

3. How do I access the BIOS in Windows 10?

You can access the BIOS in Windows 10 by restarting your computer and pressing the key that appears on your screen during the boot process. This key varies depending on your computer’s manufacturer.

4. What are some common keys to access the BIOS?

Some common keys to access the BIOS include F2, F10, Delete, and Esc. You may need to consult your computer’s manual or search online to find the correct key for your computer.

5. When should I press the key to access the BIOS?

You should press the key to access the BIOS immediately after restarting your computer. If you miss the window of opportunity, you can restart your computer and try again.

6. What happens if I press the wrong key to access the BIOS?

If you press the wrong key to access the BIOS, your computer will continue to boot as normal. You can restart your computer and try again with the correct key.

7. Can I access the BIOS from within Windows 10?

No, you cannot access the BIOS from within Windows 10. You must restart your computer and press the correct key during the boot process.

8. How do I know if I accessed the BIOS successfully?

If you accessed the BIOS successfully, you will see a screen with various options and settings for your computer’s hardware components. If this screen does not appear, you may need to try restarting your computer and pressing the key again.

9. What should I do if I cannot access the BIOS?

If you cannot access the BIOS, you may need to consult your computer’s manual or contact the manufacturer for assistance. It is possible that the key to access the BIOS has been changed or disabled.

10. Can I damage my computer by accessing the BIOS?

No, accessing the BIOS will not damage your computer. However, changing hardware settings or configurations in the BIOS can potentially cause problems if not done correctly.

11. Can I reset the BIOS to its default settings?

Yes, you can reset the BIOS to its default settings. This may be helpful if you have made changes that are causing problems with your computer’s performance or stability.

12. Will resetting the BIOS erase my data?

No, resetting the BIOS will not erase your data. However, it may reset some of your hardware settings and configurations.

13. How do I reset the BIOS to its default settings?

You can reset the BIOS to its default settings by accessing the BIOS and selecting the option to reset or restore defaults. This option may be located in a menu called “Setup,” “Advanced,” or “Tools,” depending on your computer’s manufacturer.

How to Go to BIOS in Windows 10

Have you ever needed to access your computer’s BIOS settings? Sometimes you may need to change the boot order, disable secure boot, or modify other settings in order to troubleshoot issues on your computer. While accessing the BIOS used to be a simple task, Windows 10 has made it a bit more complicated. Don’t worry though, in this article we will show you exactly how to access your BIOS on a Windows 10 machine.

The first step to accessing the BIOS is to restart your computer. Once your computer has restarted, you will need to hold down the Shift key while selecting Restart. This will restart your computer into the Windows recovery environment.

Once you have rebooted into the Windows recovery environment, you will be presented with a screen that has several options. You will want to select Troubleshoot and then select Advanced options.

After selecting Advanced options, you will be taken to another screen. Here you will want to select UEFI Firmware Settings. This will take you directly to your BIOS settings so that you can make any necessary changes.

Conclusion and Closing

Accessing your computer’s BIOS in Windows 10 can seem like a daunting task, but with the steps outlined in this article, you should be able to access your BIOS with ease. If you are still having trouble accessing your BIOS or making changes to your settings, be sure to consult your computer’s manual or manufacturer’s website for additional guidance.

Thank you for reading, and we hope this guide has been helpful to you. Good luck with your troubleshooting endeavors!